|
|
Posted by come_mon_come_mon! on 10/16/38 11:34
smh 寫道：
>
> Go into the BIOS, and check the drives are recognized and set to
> something like Auto or Enable.
I found no similar setting, every time I insert a H/W component into
the IDE bus, BIOS will automatically display it's configuration (e.g.
LG GSA-4167B...) as PC started up.
>
> Then check the drives are on DMA:
>
> Control Panel, Sytem, Hardware, Device Manager, Ide Ata/Atapi
> Controllers, Primary or Secondary IDE channel, Advanced tab
> '
>
Checked, it's DMA mode 2.
Navigation:
[Reply to this message]
|