|
|
Posted by Biz on 12/20/05 15:06
<rofoster10@gmail.com> wrote in message
news:1135051288.563726.93550@g43g2000cwa.googlegroups.com...
> I had the same problems with pauses near the end of movies.
>
> What I found is that it appears to be incompatabilities between the
> media and the drive. May also be the speed at which you burn the disk.
>
> With my first burner, I was using DVD-R disks and was getting pauses. I
> changed to DVD+R and the problems went away. I have been using +R disks
> for some time now.
>
> I recently changed to a newer burner and ran into the same problem.
> After looking into everything, I decided to try DVD -R disks. This
> again solved the problem.
>
> Hope it helps.
>
Its actually a little more complicated than that, as long as both your
burner and player support the disk types, +/- etc....it all boils down to
useing good media, and not the cheap crap media that everyone wants to buy
because its so cheap. There is a reason its so cheap...buying good quality
media, burning at or below the rated speeds for the disks, and not trying to
completely fill the disk are 3 of the most important things to remember for
reliable lasting burns...
Navigation:
[Reply to this message]
|