|
|
Posted by Rick Merrill on 04/22/06 17:09
Larry in AZ wrote:
> Waiving the right to remain silent, "Richard Crowley"
> <rcrowley@xpr7t.net> said:
>
>
>>"Maxheadspace" wrote ...
>>
>>>Greetings! I have a camera that only accepts XLR microphone plugs.
>>>I have a wireless mic with a 1/8" mono plug. Can anyone point me to
>>>a source for an adapter to go from a 1/8" or 1/4" mono plug to a
>>>male XLR plug? I've found all kinds of male-to-male, male XLR to
>>>male 1/4", female to male XLR, male MLR to RCA jack, etc, but no
>>>1/8" or 1/4" mono plug to male XLR plug. Any help is appreciated.
>>
>>http://www.markertek.com/Product.asp?baseItem=HK%2D121M&cat=CABLESCONN
>>&subcat=AUDIOADAPT&prodClass=XMAD&mfg=&search=0&off=
>
>
> I would not use the type of mini-XLR adapter shown at the top. It puts
> way too much strain on the mini connector, particularly if it sticks out
> of the side of the camera.
>
> Better to get each of the standard connectors and put a short length of
> wire between them. A "Pigtail" as it's known. A right-angle mini
> connector would probably be best.
>
You're right. OP asked the wrong question: he asked for an "adapter" but
he really needs the wiring diagram or maybe an "adapter cable".
Navigation:
[Reply to this message]
|