|
|
Posted by mcsteve on 04/23/06 23:25
"Sucuba Dude" wrote:
> The whole M-Audio range is fantastic. Very low latency and very high quality.
>
Yes, that's why people use it to interface mics for 'reference' purposes,
such as RTA and system alignment. When assessing the frequency
response of a system, the last thing you want is coloration from the
signal chain that feeds the mic into the rig.
> That said most of the pro ones don't have a mic input
>
The one I referred to in my previous post has TWO mic inputs,
with phantom power. I wouldn't have mentioned it at all, if it
didn't have a goddam mic input!
In fact,here's the complete input and output list for the
Mobile Pre USB:
2 microphone inputs (XLR balanced) with 48v phantom power
stereo microphone input (1/8”)
2 high-impedance instrument/line inputs (balanced/unbalanced 1/4” TRS)
2 mono line outputs (1/4” @ -10dBV)
stereo line output (1/8”)
stereo headphone output with level control knob
------------------------
Steve McQ
Navigation:
[Reply to this message]
|