|
|
Posted by Ty Ford on 05/10/06 22:59
On Wed, 10 May 2006 16:09:56 -0400, Maurice wrote
(in article <oMr8g.2545$fS1.2480@newsfe6-win.ntli.net>):
> I have been given some tapes to edit shot in DVCAM format on a Sony Z1. To
> the best of my knowledge all the sound (voice only) was recorded using a
> radio mic.on one channel.
>
> NLE is Pinnacle Liquid Edition 6.1 SP2.
>
> Everything appeared to capture fine and I hear audio from the deck whilst
> capturing but I am getting audio out from the sound card only on one socket,
> the woofer/centre socket. Absolutely nothing on the other output sockets. I
> don't think it is full spectrum out but it sounds about right for a centre
> out, i.e. voice frequencies All other tapes shot on other cameras are fine
>
> Anybody have any ideas? Odd non-compatible audio on the Z1 or faulty camera
> or faulty mic connection, etc., etc. Never had anything like this before. I
> am at a loss but hesitate to get my own Z1 until I know the answer
>
>
>
Sorry, I failed to read the DVCam part correctly. DVCam does give you 16-bit
, 48 kHz. But the issue, I think is stiil, you recorded on one mic to one
channel.
Ty Ford
-- Ty Ford's equipment reviews, audio samples, rates and other audiocentric
stuff are at www.tyford.com
Navigation:
[Reply to this message]
|