|
Posted by tnom on 06/01/06 02:09
>I followed the instruction manual's setup by plugging my video and
>audio cables (output) from the camera into the dvd recorder's Line 2
>input. I've got the recorder's output cables going into the tv. I
>changed the channel on the recorder so it's on ch. 2 (to correspond
>with the Line 2).
You are assuming that line 2 means channel 2. It does not.
The video camera should be set for line output. This will put the
signal on the RCA phono jacks. Then if you have the cables plugged
into line input number 2 on the recorder then you must also tell the
recorder to use that source.
Navigation:
[Reply to this message]
|