|
|
Posted by fmccarthy on 08/09/06 22:47
Yea found the answer by doing a little research,videohelp.com great site..
"GMAN" <not@home.now> wrote in message
news:eam1n0$l6c$1@news.xmission.com...
> In article <Pgbzg.2204$jt.1730@trnddc04>, "fmccarthy"
> <fmccarthy@verizon.net> wrote:
>>Shop says no go on fix, microprocessor problem? so I was able to get to a
>>firmware restore and that cleared up the problem so far.
>
>
> So the shop couldnt repair or figure out that it just needed a firmware
> reflash but you were successful in doing it yourself? Good job, and
> Unfuggin'
> believable how incompetent the service center was.
>
>
>>"fmccarthy" <fmccarthy@verizon.net> wrote in message
>>news:i0xug.4490$A8.3180@trnddc02...
>>> Thanks for the info broke down and took it to a repair shop and am
>>> awaiting the verdict.
>>> "Mike S." <retsuhcs@xinap.moc> wrote in message
>>> news:e98qgb$57u$1@reader2.panix.com...
>>>>
>>>> In article <SWPtg.8$D7.1@trndny03>, JK@work <JKSinrod@verizon.net>
>>>> wrote:
>>>>>
>>>>>"fmccarthy" <fmccarthy@verizon.net> wrote in message
>>>>>news:xqztg.9094$F8.2803@trnddc02...
>>>>>> My lite on 5007 dvd recorder has a problem, when I turn it on it will
>>>>>> say
>>>>>> hello and the fron panel will show a-2 input(or output) and the
>>>>>> freeze
>>>>>> there. I can turn it off and on but thats it any suggestions? don't
>>>>>> want
>>>>>to
>>>>>> purchase another unit. thanks
>>>>>
>>>>> I would flash it, it it were mine. I have a 5005 that was acting up,
>>>>> and
>>>>>applying the firmware again, cured it.
>>>>
>>>> It really sounds, though, like he has a hardware issue. If the machine
>>>> can't get past its own initialization routine, it smells like something
>>>> is
>>>> seriously wrong. Attempting a firmware flash under those circumstances
>>>> is
>>>> not likely to be successful ... and rather risky.
>>>>
>>>
>>>
>>
>>
Navigation:
[Reply to this message]
|