|
|
Posted by Franc Zabkar on 03/23/07 05:41
On Thu, 22 Mar 2007 03:15:50 -0400, "Jeff Ingram" <ingramje@gmail.com>
put finger to keyboard and composed:
>Hello,
>
>I've got a Panasonic DMR-ES25S DVD Recorder and the remote control on the
>unit won't work most of the time. It will usually turn the unit on and off,
>but that's it. I can't even get it to start or stop player, much less get
>into the menu and record anything. The controls on the front of the unit
>work fine.
OK, so the processor is alive and there is no child lock.
>I've made sure that new batteries were put into the remote, but
>to no avail I get no more than ON and OFF functionality.
>I've had the unit place in two different rooms, upstairs and downstairs in
>the basement.
That would rule out interference from IR sources such as CF lamps.
>I even made sure that the batteries were good by testing them
>with a meter. I've tried 3 different sets too.
>
>Anyone run into a problem like this? Anyone got the fix?
>
>Thanks,
>
>Jeff
A web cam or digicam can usually see the IR emissions from a remote
control. If some buttons produce a flash but others not, then
disassemble the remote control and clean the contacts, on both the PCB
and rubber pad, with a cotton bud swabbed in isopropyl alcohol.
- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.
Navigation:
[Reply to this message]
|