Posted by Don M. on 08/29/05 15:30

"Billy Joe" wrote in message news:x92dnenxloDgko7eRVn-tw@adelphia.com...
>
> The snapshot shows a cue sheet in the edit window. Whenever a cue sheet is
> loaded, the next step must be "Check Frames" as the program makes no
> assumptions about byte offsets into files. Placing the cursor into the edit
> window will cause the program to revert to "Cut Frames" *IF* "Track frame
> offsets" were deposited. Otherwise, it will allow "Revise Cuts" to be
> active, if one or more passes thru the file have already been made.
>
> So the order of use would be:
> a) drag source file
> b) drag target folder
> c) paste cue sheet (at which time the Instructions will be auto-cleared).
> d) Tab out of the edit window, the Tweak box will be selected (modify, if
> necessary)
> e) Tab to or select "Cut Frames"
>
> At this point the "Revise Cuts" button will be enabled.
>
> Selecting the "Tweak Box" or pasting a cue sheet after this point, will
> cause a return to the "Check Frames" state.
>
> After "Revise Cuts," "Cut" will be enabled.
>
> Placing the cursor in the edit window (but not pasting cue data) will
> disable "Cuts" and re-enable "Revise Cuts."
>
> So, I'm guessing, from what you've said that after having executed "Check
> Frames" and possibly "Revise Cuts," you then pasted the cue sheet into the
> edit window? And that would most definitely put you back to step one.
>
===========

Sorry, BJ. I can't for the life of me get any of the 2 middle buttons activated. I do a
clean a) through d) but can't get "Revise Cuts" or "Cut" to come out of their grayed out
states. Step e) gives me only "Check Frames" (the leftmost button). And now 1.2g isn't
picking up the silence breaks in the MP3Merger album like 1.2f and earlier did; it's
reporting 1 track. Ok, so I at least get a "Revise Cut" and now I replace contents in the
edit window with the freedb cuesheet. Still no joy; I press "Revise Cuts" and am back to
"Check Frames"...


Don

[Back to original message]