Posted by Smarty on 10/06/05 20:28

You will not need equalization, but you do need to attenuate the line level
signal (nominally about 1 millivolt into 47K ohms) down to a few microvolts
(also at the same impedance). Thus an attenuator / pad of about 30 dB should
do it.

Smarty


"Andy & Kim" <Andy@akmt.demon.co.uk> wrote in message
news:di3und$db1$1$8300dec7@news.demon.co.uk...
> Hi guy's what would I need to put a line level input into a mic input of
> my little had held digital camera. Would it just have to be a potential
> divider or would it require some EQ.
>
> Andy
>

[Back to original message]