Posted by Larry J. on 10/06/05 20:44

Waiving the right to remain silent, "Smarty" <nobody@nobody.com>
said:

> You will not need equalization, but you do need to attenuate the
> line level signal (nominally about 1 millivolt into 47K ohms)
> down to a few microvolts (also at the same impedance). Thus an
> attenuator / pad of about 30 dB should do it.

An even larger pad could be required. Unbalanced live levels are
generally -10 to -20db. Balanced can be as high as +8.

--
Larry Jandro
Video Engineering & Equipment Rentals
Scottsdale, Arizona, USA
[Remove spamtrap in ALLCAPS to reply]

[Back to original message]