|
Posted by Joe on 08/29/05 01:29
nospam@nospam.se (Jan B) wrote:
> On Sun, 21 Aug 2005 10:29:13 -0500, dont@spam.me (Joe) wrote:
>
> ...
> >all
> >the learning for us <g>. One of the easiest way is to try the program
> >designed specific for DVD Cover or Label, and let the program teach us =
> >what
> >we need (the requirement) for it to do thing correctly. If some program
> >doesn't do correctly then look for other (some may have bug on some =
> >printer
> >or cover). Cuz it's very simple.
> >
> >1. The program may not work *if* doesn't meet the requirement
> >
> >2. If it meets the requirement then it's 99-99.99% chance to work.
> >
> > I don't know what the original poster want to print, but I did printed
> >around 100+ DVD sleeve covers (standard DVD cover you see in store), and
> >printed thousands of DVD covers directly on Inkjet Printable CD/DVD.
>
>
> The OP wanted to print 10.7" on 11" paper using an HP inkjet printer
> which apearently needs 0.5" at the bottom to hold on to the paper.
>
> (My HP printers also need that margin, but I use A4 sized paper so I
> have no problems with the DVD-sleeve size.)
>
> Maybe there is some margin built in (in the 0.5" margin) you could
> squezze out, but if the paper is not held steady the print at the end
> will not look good.
> /Jan
I do not care what the OP wants. as what I said, if the OP wants to print
the standard DVD case label, then get the program and lets the program does
all the thinking for the OP.
I have Epson and HP printer, and had to trim off the width a little, the
length is about the same length with 11" (may trim off a hair). So, like I
said, find the program (try Surething) and lets it do all the figuring,
setting, printing etc.. and as long as you meet the requirement then it
should work. If not, try some trick. I don't pay much attention to what my
printers can do but I have
HP PhotoSmart 7350 (or something like that)
Epson Stylus Photo 900 (for DVD cover printing), and I printed DVD sleeve
cover with this printer.
[Back to original message]
|