Posted by Biz on 09/07/05 15:45

DOnt use the 5.1 outputs, use the analog left/right outputs(red/white), then
you will need y-adapter stereo to mono adapter, available at just about any
reasonable electronics place like Radio Shack, etc...

"boardrider" <GoogleGroups.rbarakX@xoxy.net> wrote in message
news:1126080053.609330.38520@g44g2000cwa.googlegroups.com...
> Hi,
>
> I bought a new DVD player that has 5.1 Audio outputs.
> However, the TV I try to connect to has only one "Audio In" connector.
>
> The white-yellow-red cable that came with the DVD is compatible with
> the TV connector, so that's not the problem.
> The problem is how to mix all 5.1 audio out channels to one stream,
> that could go into the TV ?
>
> Is there a FAQ somewhere that answer this question ?
>
> Currently, I connect the TV into either the Left, Right or Center DVD
> out channels, but obviously, not all audio gets to the TV.
>
> So, what is the recommended way to mix 5.1 channels (at least the Right
> + Center + Left channels) into one audio stream that could be fed into
> a TV Audio In ?
>
> Thanks,
> BR.
>

[Back to original message]