Posted by DominickTotino on 01/26/06 16:18

MTBlood wrote:
> I just realized that you wrote that you have an old console tv. Is it cable
> ready or does it have twin lead inputs? If it has twin lead inputs then you
> will need an adaptor to use a coaxial cable.
>
> If it is old then it probably does not have RCA inputs. In that case this is
> the correct configuration. Cable from wall to cable box input, cable box
> input to modulator via coaxial cable, modulator output to tv input via
> coaxial cable. Then it's DVD output to modulator input via rca cables. The
> dvd signal should then should share the coaxial cable of the modulators
> output that the cable box does.
> "MTBlood" <M_Truebloodnospam@comcast.net> wrote in message
> news:-N2dnQ4ytacwXkXenZ2dnUVZ_sednZ2d@comcast.com...

I have to check for the twin leads. It is def not cable ready but there
is the plug for the coaxial so i assume i don't need the adaptor for
the twin leads, I am pretty sure they are on the back of the TV though.
When i got the TV it had a post it note on the back pointing to the
coaxial and it said To VCR. But I assume that it meant if you didn't
have a cable box. The cable box i bought is very very basic. its a
Panasonic TZ-PC1303N. Here is a picture:
http://i13.ebayimg.com/01/i/03/c0/c9/42_1_b.JPG . I am at work right
now but when i ge thome i'll try what you wrote. Thanks!

[Back to original message]