Posted by Bill's News on 01/10/12 11:50

Greg wrote:
> Thanks, Gino
> I have this setup:
>> From Philips DVP 3050V DVD/VCR Player
> DVD/VCR Audio Out White and Red
> To DVD 3390 DVD Player/Recorder
> Audio Input White and Red
>
>> From Philips DVP 3050V DVD/VCR Player
> Video OutY Yellow
> To DVD 3390 DVD Player/Recorder
> Video (CVBS) Ext 1 Yellow
>
> Philips DVP 3050V DVD/VCR Player
> Cable input connected to Antenna In
> Connections to TV are:
> TV Out
> Video (CVBS) Yellow
> S-video (Y/C)
> Audio Output L White and R Red
<snip>

My circa '99 Toshiba TV would not operate when both S-Video AND
composite video were connected to video-1 (both of these inputs
were assigned to this "channel"). If you have an S-Video
connection made, remove the composite (yellow cable).

If you have component inputs (red, green, blue coded) on the TV
and outputs on either or both devices, use those in lieu of
either S-Video or composite video.

If your TV is like my discarded Toshiba, you won't be able to
connect using only composite and S-Video; you'd need to daisy
chain the devices or use component connections.

[Back to original message]