Posted by fmccarthy on 07/30/06 23:28

Shop says no go on fix, microprocessor problem? so I was able to get to a
firmware restore and that cleared up the problem so far.
"fmccarthy" <fmccarthy@verizon.net> wrote in message
news:i0xug.4490$A8.3180@trnddc02...
> Thanks for the info broke down and took it to a repair shop and am
> awaiting the verdict.
> "Mike S." <retsuhcs@xinap.moc> wrote in message
> news:e98qgb$57u$1@reader2.panix.com...
>>
>> In article <SWPtg.8$D7.1@trndny03>, JK@work <JKSinrod@verizon.net> wrote:
>>>
>>>"fmccarthy" <fmccarthy@verizon.net> wrote in message
>>>news:xqztg.9094$F8.2803@trnddc02...
>>>> My lite on 5007 dvd recorder has a problem, when I turn it on it will
>>>> say
>>>> hello and the fron panel will show a-2 input(or output) and the freeze
>>>> there. I can turn it off and on but thats it any suggestions? don't
>>>> want
>>>to
>>>> purchase another unit. thanks
>>>
>>> I would flash it, it it were mine. I have a 5005 that was acting up,
>>> and
>>>applying the firmware again, cured it.
>>
>> It really sounds, though, like he has a hardware issue. If the machine
>> can't get past its own initialization routine, it smells like something
>> is
>> seriously wrong. Attempting a firmware flash under those circumstances is
>> not likely to be successful ... and rather risky.
>>
>
>

[Back to original message]