Posted by Richard Crowley on 10/26/06 00:02

"Bernie" wrote ...
> How about using professional composite video cable? It doesn't break
> too easily, and 100ft is no problem. For an example, go to
> http://rswww.com/ and look for part number 240-6696. You normally put
> BNC connectors at either end, but you don't have to, or you can make up
>
> short adaptors. It isn't cheap, but it'll last a good long time.

Bog-standard antenna coax from RadioShack, etc.
will do the same. I think I suggested that. Could even
route it to wall plates (as if it were antenna/cable TV)
and then use short jumper cables between wall plate
and camera. With two lengths you could do Y/C
("S-Video")

[Back to original message]