Posted by Rich Piehl on 11/12/05 23:33

Me wrote:
> "Me" <Me@Me.com> wrote in message
> news:t_rdf.7691$Tk1.141728@news20.bellglobal.com...
>
>>"Rich Piehl" <rpiehl5REMOVETHIS@FORNOSPAMcharter.net> wrote in message
>>news:UOodf.9576$GT3.9144@fe02.lga...
>>
>>>Before anyone jumps me for piracy I want it made clear that I'm only
>>>interested in the freebie channels.
>>>
>>>I have a valid subscription to Dish Network, have a DN 500 dish and 2 DN
>>>receivers on it. Is there a way, using DiSEcQ switches and splitters
>>>that I can tap into the coax for the 2 feed horns and get the DN signal
>>>to my VP 1020 card without disrupting the signal to the receivers?
>>>
>>>TIA
>>>
>>>Take, care,
>>>Rich
>>>
>>>God bless the USA
>>
>>
>>Sure is. How do you have it connected to your receivers now? Each coax
>>(from the Dual LNB) to each of your receivers?
>>If so, get a "Multi-Switch" . Plug both ends of dual LNB output to the
>>input of the multi-switch, and the output of the multi-switch (can have 4
>>or more outputs) connect to each of your receivers (and one to your VP1020
>>card)
>>
>>
>>
>
>
> here is what they look like, note they don't work with Dish 500 if thats
> what you have...
>
> http://www.merchantamerica.com/utahsatellite/index.php?ba=product_enlarge&product=9558
>
>
>
It is a Dish 500. Any other ideas?

Take care,
Rich

God bless the USA

--
Some people are like slinkies; not really good for anything,
but they still bring a smile to your face when you push them
down a flight of stairs.

--Glenn Beck

[Back to original message]