Posted by Ad Hoc Guy on 12/06/05 02:53

Well not really Kryppy. I have a 3 sat set up and a DISEqC X4 Pansat and
when I tune in from one sat to another the switch either is very slow or
doesn't switch at all. I have to shut down the receiver in OFF and turn ON
again to force the LNB to switchover. Somnewone told me it was because of
the LNB's being too strong for FTA Regards

--
"Two antennas meet on a roof, fall in love and get married. The
ceremony wasn't much, but the reception was excellent."

"kryppy" <kryppy@.> wrote in message
news:b0j0p1tksr087opcfb6396jtgav65lests@4ax.com...
> On Fri, 02 Dec 2005 00:19:46 GMT, "seog" <no@none.com> wrote:
>
>>I'm not getting some channels so I'll replace my diseq switch and see if
>>that helps. Can someone recommend a high quality brand?
>
>
> If you only get two sats, dump it and use a 22khz tone switch.
> If not, the new pansat 4x1 switches seem to work real nice.
>
>
>

[Back to original message]