|  | Posted by Gene on 01/18/07 22:54 
Yeah, I saw that too.
 I hate to say it, but I'm still getting some "freezes" - with the 158
 firmware,
 and also with the one that Panasonic just mailed to me (not sure what it is,
 150, or 152?)
 Both run in spurts, a string of good burns, then a random freeze ...
 geesh...
 
 I purchased a Belkin 3' 4x4 pin 1394 (DV / firewire) cable thinking that
 good
 quality and a SHORT cable would help.  But no help. Tried 4 DV cables so
 far.
 
 I'm slowly coming to the realization that Sony digital camcorders
 (in my case PC100 MiniDV , TRV460 and TRV240 ) have a DV
 (firewire) compatibility issue.  I guess I have to sell the Panasonic
 ES20 & get a comparable Sony brand DVR that will allow me to copy digital
 tapes to DVD without crashing.  I have a LOT of old 8mm tapes to copy
 to DVD. Really hate to get rid of the ES20, it's an awesome little recorder,
 other than the problem with the Sony camcorders & DV.
 BTW, S-Video & analog audio to the ES20 "REAR" connectors
 works 100% of the time with all brand camcorders that I have tried. It's
 only
 the DV connection that freezes with the Sony camcorders.
 
 Anyone have a suggestion as a replacement for my ES20?
 I must copy over a thousand+  8mm & D8 tapes, so I'm stuck
 with the Sony brand.  Guess all that I need to decide on is WHICH
 Sony set-top box will work with my Sony camcorders in DV mode.
 
 Here is what I want to do:
 
 1. Connect a Sony digital camcorder via DV (firewire) to a DVR (set-top
 box).
 
 2. Copy over ~ 1.5 hrs of digital video from the Sony camcorder tape to a
 DVD+-R in a way that FILLS the entire DVD with video data.
 A 1.5 hr mode that fudges a few minutes more (like 95 minutes)
 would be ideal.  I can choose the SP 2 hour mode & not get hurt too badly.
 BTW, I have been shooting in LP (90 minute) MiniDV mode and have
 never had a problem.  The quality is 100% the same in either SP (60),
 or LP(90) - just more likelihood that you will get some dropout in LP.
 
 
 Anyone care to recommend a specific DVR set-top box make & model number
 that will work with Sony digital camcorders in DV mode ?
 
 
 THANKS,
 Gene
 
 
 
 
 
 
 
 
 "Franc Zabkar" <fzabkar@iinternode.on.net> wrote in message
 news:pahvq2hpthk84n35lbbr9jh8ghv6aseqg1@4ax.com...
 > On Thu, 18 Jan 2007 11:38:37 -0600, "Gene" <genes@wildblue.net> put
 > finger to keyboard and composed:
 >
 >>FYI:  "FOUND" the correct firmware for the ES20 .
 >>The latest from the USA was  ~ U3-150, or so - which is not the best
 >>choice, IMHO.
 >>
 >>I flashed with the new U3-158 from Canada, and all the frozen screens,
 >>etc.
 >>when going from my Sony PC100 LP (1.5hr) camcorder to the ES20 in SP200
 >>via DV cable (firewire) has worked 100% - zero hang-ups - so far:-)
 >
 > FWIW, the firmware history file makes no mention of any firewire
 > issues.
 >
 > - Franc Zabkar
 > --
 > Please remove one 'i' from my address when replying by email.
 [Back to original message] |