|
|
Posted by MG on 11/22/07 01:50
"nappy" <n@n.n> wrote in message
news:fq31j.19121$4V6.10173@newssvr14.news.prodigy.net...
>
> "MG" <m@m.org> wrote in message
> news:4744aeb3$0$26111$88260bb3@free.teranews.com...
>>
>> "nappy" <n@n.n> wrote in message
>> news:rE01j.11852$yV6.4706@newssvr25.news.prodigy.net...
>>>
>>> "peter" <nospam@nospam.com> wrote in message
>>> news:s601j.8031$B21.3345@trndny07...
>>>> "Vic Thomas" <vic@psion.net> wrote in message
>>>>>
>>>>> DV and DVCAM conform to "blue book" standard when transfered via
>>>>> firewire, DVCPRO does not. Sony machines that play DVCPRO will not
>>>>> output it via firewire. Some Panasonic AJ-D??? machines have
>>>>> "firewire" out but likewise there is no output when DV/DVCAM tapes are
>>>>> played, this connection is for dubbing between Panasonic machines,
>>>>> most (all?) nonlinear software will not recognise the signal from
>>>>> these machines.
>>>>> Best way to incorporate DVCPRO is to use a machine that has SDI out
>>>>> and a nonlinear device that can capture it.
>>>>
>>>> How do professional production facility edit their DVCPRO footage if
>>>> they cannot do a digital lossless transfer to a computer? Or do people
>>>> who shoot in DVCPRO format not plan to edit with computer? Why do some
>>>> people choose DVCPRO over DVCAM, despite this problem?
>>>>
>>>
>>> the SDI output provides that functionality.
>>>
>>
>> The DSR 1500A (current model) has iLink connectivity via firewire to
>> nonlinear systems.
>>
>> mg
>
> yes.. but reading further in the spec reveals an asterisk next to the
> DVCPRO25 spec. The asterisk note says that it is not available on the
> firewire interface (iLink)
>
>
>>
>>
>>
>> --
>> Posted via a free Usenet account from http://www.teranews.com
>>
>
Hate those asterisks. Actually, after I posted that, I realized that it
probably would not work the way he had in mind anyway. The computer has to
interface to the deck, so the OP would have to connect all 3 or do an
intermediate transfer of the files to use 1394 on the DSR1500. Or, just get
it into the editor, then do whatever. But I think there is plenty of DVC
Pro being edited on nn-linear systems out there.
--
Posted via a free Usenet account from http://www.teranews.com
[Back to original message]
|