|
|
Posted by doc on 09/27/05 15:33
hi Mark and thanks for the input. this machine is a dual core processor 3.0
GHz with 1 Mb L2 cache 800 Front side bus, 2 Gb 4200 DDR2 533 Hz, 250 Gb
7.2K Sata with Windows XP Pro OS and Pinnacle LE 6 Software and Canopus
Edius Pro 3, and for storage a 300 Gb 7.2K Sata drive for data only. there
is nothing else on this computer and it's been tweaked to optimize
performance. this computer is for MEDIA only and nothing else.
i certainly agree with what your saying that it's dropping stuff during the
output AND canopus worked fine but LE is having a serious problem and with
all the effects we have and the multicam desire we want to use LE.
thoughts?
regards,
doc
"Mark Spacey" <vax2002news@tiscali.co.uk> wrote in message
news:1127809567.309205.313250@o13g2000cwo.googlegroups.com...
> You need a good editing deck such as a sony gv deck or the camera it
> was shot on, your consumer may not be able to read the timeline.
> then a fast computer with shedloads of memory and a very large blank
> harddrive with nothing but the software on and the os.
> you are pushing your luck trying to run any video software at dv
> quality on a computer loaded with anything but the capture edit
> software and os.
> It sounds like it is a timebase line read fault causing a frame drop
> every third frame and two every 9th.
> Consider buying some capture software such as adobe pro (it works) and
> a blank 200gig + harddrive loaded with windows xp pro edition, then
> only use the editing deck or the origonal camera to load it in.
> Hope this helps
>
Navigation:
[Reply to this message]
|