|
|
Posted by AnthonyR on 09/26/77 11:28
<blackburst@aol.com> wrote in message
news:1128433567.515883.254670@g14g2000cwa.googlegroups.com...
>
> AnthonyR wrote:
>> <blackburst@aol.com> wrote in message
>> news:1128373332.795991.297420@g49g2000cwa.googlegroups.com...
>> >
>> > AnthonyR wrote:
>> >> Can you tell me which model dvd standalone you are using?
>> >> Perhaps it's a problem with that hardware or firmware?
>> >
>> > It has happened on several:
>> > Emerson EWR10D4
>> > Go Video VR3930
>> > LiteOn LVW-5005
>> > Sony DVD recorder/VCR combo, number unrecalled
>> >
>> I don't believe any of those models have a built in tbc.
>>
>> >
>> >> You can try a google and see if you're not alone using that brand or
>> >> model
>> >> recorder.
>> >> Also an inline time base corrector between the two might help, as
>> >> years
>> >> ago
>> >> that's what
>> >> I had to do to get good dvd's out of my early philips standalone dvd
>> >> recorder.
>> >> I had worse than out of sync audio problems, I use to get audio that
>> >> would
>> >> drift and then quickly try and catch up
>> >> crealting a blirp type audio glitch. The TBC eliminated it but I've
>> >> since
>> >> sold that unit and seen newer dvd recorders
>> >> selling with built in TBC now as almost standard feature on the good
>> >> ones.
>> >> AnthonyR.
>> >
>> > Wouldn't a TBC slow down the signal a bit? I hate what some TBCs do to
>> > the signal, and it prevents using firewire. I have a For.A FA-310, and
>> > it really craps things up. I wish they made TBCs without proc amps.
>> > (OTOH, it's a great way to defeat some copy protection schemes!)
>> >
>> Well the tbc I had use was a datavideo tbc-1000 I don't believe it has
>> any
>> proc-amp features.
>> And I don't know about slowing down the signal, it accepts audio in as
>> well,
>> so it might adj for that?
>> But it had solved my audio problems when I was doing direct to dvd
>> recording. Of course my audio problems
>> were on analog tape, but I have had some audio problems from a defective
>> sony camcorder so I think
>> possibly it might be your camera itself, try a different one and a fresh
>> tape and capture to see.
>>
>>
>> Perhaps the problem is in your camera? Have you tried another model?
>> And a different source tape? That might help identify your problem.
>> Good Luck,
>> AnthonyR.
>
> It happened with both my Panasonic PVGS15's from work (3 of them) and
> my home Panasonic 3-chip DV.
>
> But I just bought 2 Sony DSR45 DV/DVCAM decks for my studio. I'll let
> you know if it happens with them!
>
OK, but were you playing the same footage (same dv tape) with all 3 cameras?
cause what happenned to me, was a bad camcorder recorded bad audio on dv
tape, which carried over
to any camcorder i played that tape on.
So did you try capturing new material on new tape using another camera and
testing audiio drift on recorder?
Or are you just substituting equiptment using this same dv tape (which might
have the problem recorded on it).
Just an idea!
Good luck,
AnthonyR.
Navigation:
[Reply to this message]
|