|
Posted by Richard Crowley on 12/22/05 08:24
raja.rajendran wrote ...
> Recently my mini-dv camcorder alerted "Head Dirty,
> Clean Head" when recording. The message disappered
> after the recording was stopped and restarted.
>
> When the tape was reviewed after recording, some
> segments were recorded perfectly, some had a blank
> blue screen with no timecode and others had horizontal
> bands (with timecode but the image in the horizontal
> bands were static while the image outside the bands
> was the actual recording).
>
> Is there any way to recover the recording in the tape?
> The recordings were done during our recent vacation
> and I would hate to lose them.
1) Play the tape back on the same machine that recorded it.
2) Run a head cleaning cassette which is approved by the
on the manufacturer of your camcorder. Be sure to follow
the instructions that come with it. DON'T over-do it!
3) Take your camcorder to a repair shop along with the
tape and tell them what happened and what you want.
4) Next time, don't ignore the "Clean Head" message.
Carry a head cleaning cassette in the camera bag.
Navigation:
[Reply to this message]
|