|
|
Posted by Mark on 09/03/05 02:12
>"Joe" <dont@spam.me> wrote in message
>news:41204624.41172368@anonymous.com...
>"Mark" <mjmorgan(lowest even number here)@cox..net> wrote:
>
>> >"Joe" <dont@spam.me> wrote in message
>> >news:40797392.22331064@anonymous.com...
>> >nospam@nospam.se (Jan B) wrote:
>> >
>> >I do not care what the OP wants.
>>
>> Then why are you responding?
>
>Why am I responding? Because I response to give the ANSWER, and the
>ANSWER mentions about the REQUIREMENT(s). Too simple to understand?
>
>> >as what I said, if the OP wants to print
>> >the standard DVD case label, then get the program and lets the program
>> >does
>> >all the thinking for the OP.
>>
>> You still don't get it.
>
>I don't have problem because I don't get it? you do get it but can't
>figure out the problem? This you can say "I don't get it" <g>
>
>> A "program"...no matter how cool or smart...can't change the
>> edge-printing
>> capability of a printer that isn't built to print that near the back
>> edge.
>
>And that is why I told you to start with the program instead of trying to
>chew my behind for nothing. IOW, the program should be designed by a
>SMARTER people (not by me) and they know exactly what their program can or
>can't not do. You do not need to stand here to disagree with me which
>won't
>stretch your printer margin any wider (be wiser to let the program handles
>all the thinking instead)
>
>> >I don't pay much attention to what my
>> >printers can do
>>
>> That's coming accross quite clearly.
>
>See, I am a much smarter person who know how to have program serves me, I
>don't even need to know how the program and printer communicate with each
>other. All I know is a perfect print. Got it?
You are still talking about a "program."
A "program" has N-O-T-H-I-N-G whatever to do with the issue!
It is a HARDWARE-PRINTER issue...NOT a program issue!
MAN you are thick!
Feel free to respond, but I won't see it.
You are now in my plonk file, as my patience with your thick-headed attitude
has run out.
Good bye.
Navigation:
[Reply to this message]
|