|
Posted by come_mon_come_mon! on 12/11/05 18:38
SalesMart.com.au 寫道:
> On 28 Nov 2005 04:55:10 -0800, "come_mon_come_mon!"
> <come_mon_come_mon@yahoo.com.hk> wrote:
>
> >Hi,
> >
> >I would like to ask among below 3 DVD writer models
> >
> >BenQ DW1640
> >NEC ND-3540A
> >LG GSA-4163B
>
> If you are in Australia then the NEC DVD burners are not supported by
> NEC. Some import these so the support will be with that dealer that
> imports them. The NEC 3540A is a very good drive.
>
> The LG 4163 drives have long since been replaced by the LG
> 4165/67/66/68 models so you'll be struggling to find anyone that still
> sells the older LG 4163 drives. If you do find someone with that model
> its a very good model with firmware A105.
>
> Out of the three I would buy the LG 4163 model if available.
>
> >
> >which performs best against below items ?
> >
> >1. Ability to read from / write to various brands of DVD especially
> >those cheap ones.
> >2. DVD buring failure rate.
> >3. DVD burning speed. DVD playback rate.
> >4. Noise production during operation.
> >5. Ease of installation & configuration.
> >6. Driver support.
> >7. Compatibility with Windows OS (XP or above).
>
> Any brand of DVD burner are quite easy to install and all the modern
> drives support WinXP.
>
> To prevent burning failures update to the latest firmware and use a
> good brand of media. All the drives I've tried make virtually no
> noise.
>
> Sony and LG have good firmware updates.
>
> SalesMart.com.au
> Perth, Western Australia
> http://www.salesmart.com.au
> *******************************************
> Email Contact info on the above site.
> *******************************************
I'd just completed copying 3.9GB (3,918,326,504 bytes reported from XP)
from one software DVD-R (Konco Digial 4x 4.7GB DVD-R) via my LG drive
to my 7200 rpm HD (Althon based PC) and it took incredibly long time
(58 minutes) to complete. It corresponds to 1x read speed. Why will my
drive transferring data so slow ? I've run firmware update from CD
bundled with this drive just after I installed the drive physically.
:<
Navigation:
[Reply to this message]
|