|
Posted by Brian K on 09/29/97 11:35
> Just make sure you don't have anything running that could overwhelm
> the CPU. And unless you have a UOS (I do), don't flash during a
> weather event where you could lose power. Make sure you dump a copy of
> the existing f/w just in case. Some people like to boot into the Safe
> Mode. Make sure the 3540 is the master on the secondary IDE channel.
>
> Then click on the flash. I have done it twice on my 3540 and it worked
> both times. I only do it to defeat Riplock. I do not like to
> overspeed.
My DVD reader doesn't have Riplock so I'll still avoid the hacked firmware
for the burner. My burner is installed it as a slave for BartPE reasons. But
thanks for the info.
Navigation:
[Reply to this message]
|