|
|
Posted by Bill McCutcheon on 02/24/06 21:20
"William A. T. Clark" <clark.31@nospamosu.edu> wrote
>
> The JVC DR-MVIS had a well-documented problem in which the display would
> suddenly start flashing "Loading", and the unit would freeze. The only
> cure was to unplug the unit, and then plug it back in. This was traced
> to a firmware error, that JVC would repair for free if the unit was
> returned to them. My problem was ... [snip]
>
> William Clark
.... and the "Loading" and freezing problem is not unique to that model.
It is equally well documented in the DR-MX1S (including mine, alas!). The
OP should take a look at the "JVC disaster" thread.
-- Bill McC.
Navigation:
[Reply to this message]
|