|
Posted by wyrtwist on 09/27/05 02:28
The FTA sats are much weaker than DTV & DN sats .
Start out w/o the motor . Start out with the sat closest to yout due
south . The skew ( rotatin east or west of the LNBF ) will be closest to
zero ( top dead center ) .
Once you figure out what you are doing , progress to other sats .
Then start on the motor .
Wyr
"Eddard" <Eddard@eddard.com> wrote in message
news:EwBZe.8035$L15.537@trndny01...
>I have had Dish500 with 90-95% set-up myself with no problems.
> I presently have Direct TV self installed with signal of 90-95% no
> problems.
> I cannot get anything after 2 weeks of aligning/tweaking with the new DVB
> system.....
> I have a hotdish-75 with a .3DigitalKU lnb, on a SG-2100 motor(or without
> motor), and a Traxis DBS-2500 Receiver.
> At one point I had 70% signal but jumping between 0 and 30% quality on
> Hotbird.
> I have tried 20 diferent birds up there udjusting dish this way and that
> with no channels.
> Any ideas?? I am in NY state about 60 miles north of NYC.
> I mean is dishnet and dtv work on a 18" dish why not DVB on 30"dish??
> Thanks for any help.
> Feel free to email me at eddie@hvc.rr.com.
>
>
Navigation:
[Reply to this message]
|