|
|
Posted by cinemad on 05/15/06 10:00
Italo wrote:
> <cinemad@hotmail.com> wrote in message
> news:1146813952.890798.205500@y43g2000cwc.googlegroups.com...
> > I think page 45 of the Instruction Book is confusing. It seems to
> > indicate that 1080i signals can only be deinterlaced through the
> > analogue
> > connection inputs.
> > Actually there is an interesting rteview of the projector on
> > www.cine4home.com
> > It speaks of edge fraying in the HDMI signal. They say it needs a
> > firmware update!
> >
> > Regards,
> > Peter Mason
>
> Hi Peter, I have now tested the PJ using 1080i through its HDMI input, no
> fraying or any other type of noticeable distortion. Picture does appear
> softer than 720p through HDMI but that is only to be expected because of the
> double conversion involved. I'll check out that review, thanks.
By "double conversion" do you mean firstly conversion to 1080p and
seconldly scaling that to 1280x720?
Apparently some projectors such as the SHARP XV-Z2000 only use the odd
540 fields and scale that to 1280x720.There is an interesting article
"Are you getting all the HDTV Resolution....." at
www.hometheatermag.com (click onto reviews) Apparently of 54 HD
displays including well known brands, 26 were discarding half the 1080
fields and upscaling the remaining 540 fieds to the dfisplay's native
resolution.Do you know how the TX-200 converts the 1080i input?
Regards,
Peter mason
>
> --
> Italo
Navigation:
[Reply to this message]
|