|
|
Posted by Gene E. Bloch on 06/02/06 18:58
How's your budget for a new purchase? :-(
Wish I had a good idea,
Gino
On 6/02/2006, Chris posted this:
> ive tried all those suggestions, and nothing. The power light remains on, but
> flashes off intermittently when any button is pressed. I have removed the dvd
> but had to take the top off and slide the tray out manually.
> So , back to the drawing board.........
>
>
>
> "Gene E. Bloch" <spamfree@nobody.invalid> wrote in message
> news:mn.125e7d6690bad3bb.1980@nobody.invalid...
>> On 6/02/2006, Chris posted this:
>>> I have a Pioneer DV717 which seems to be locked in standby??
>>> I was using it as i always have, seamlessly, since the day i bought it,
>>> and i had to pause it. I would say it was paused for about 5mins. When i
>>> resumed playback, it shut off, and seems to be on standby ever since. No
>>> other functions work, the remote will do nothing either, no other lights
>>> apart from the power light illuminate, and i am totally baffled. Shutting
>>> it off from the mains does nothing, so i am appealing for help!!
>>
>> Some random ideas; maybe one will help...
>>
>> I assume you mean that you disconnected it from the mains, which is what I
>> would have recommended: disconnect it, leave it disconnected for a half
>> hour, then plug it in again.
>>
>> There might be another trick: disconnect it from the mains, and as you plug
>> it in again, hold a button on the front panel down. It could be the power
>> button, or it could be another button - this varies with the device (if it
>> exists at all).
>>
>> Is there a little hole on the front to inset a paper clip into, so as to
>> eject the disc? Are you willing to remove the cover and manually force the
>> tray open? Once you get it open and the disc out, it might work OK.
>>
>> Search their site or forums.
>>
>> Good luck.
>>
>> -- Gene E. Bloch (Gino)
>> letters617blochg3251
>> (replace the numbers by "at" and "dotcom")
>>
>>
--
Gene E. Bloch (Gino)
letters617blochg3251
(replace the numbers by "at" and "dotcom")
Navigation:
[Reply to this message]
|