|
Posted by larry@greatplainstv.com on 10/05/03 11:54
Martin Heffels wrote:
> On 31 Jul 2006 10:08:38 -0700, "larry@greatplainstv.com"
> <larry@greatplainstv.com> wrote:
>
> >The timecode is supported by Vegas 6.0. For example, if I were to
> >rewind the tape and capture in a batch mode, all clips captured would
> >have timecode relating to the orig timecode on the DV tape.
>
> But then it's using the TOD-timecode. Apparently the TOD is not
> frame-accurate. Now I have tested this but for me I always got back t the
> correct frame. maybe in the long run it won't, not sure. If you would
> recapture with 1 second-handles, you would always be accurate, and merely
> need to shift a clip by a frame.
>
> >Even in this "live" capture senerio, the time code goes through to the
> >Vegas capture and is being read in the location field on the capture
> >screen. It is just being ignored for some reason I can't quite
> >explain.
>
> But wait, you hook-up component to the DSR45? Then firewire doesn't go
> across.
>
> -m-
> --
Thanks again for the reply.
The DSR-45 generates the timeceode. SMPTE timecode and user bits. Not
time of day. The firewire connection between the DSR-45 and my capture
card supports the DSR-45 provided timecode, frame accurate, always has.
It also provides transport control to the deck.
The issue is not one of frame accuracy + or - 1 or 2 frames or
whatever. Its a matter of the deck reading 02:34:45:00 and the Vegas
capture reading 00:00:10:00.
Yes, I hookup component video to the DSR-45 from a DXC-D50 camera triax
CCU which provides component output. This is a moot point. The camera
plays no part in the original timecode generation because it has no
deck. It all starts with the DSR-45, and if I were not trying to make
simultaneous recordings to both the deck and the desktop there would be
no issues.
These DSR-45, 25 Sony decks have a setting that alows it to aquire TC
either from the firewire input or from internal generator. I understand
this operation and can dub DVCam tapes using firewire between decks
with perfect, audio, video and Timecode. I can also dub DVCam tapes
from the DSR-45 to the Vegas 6 capture using firewire as long as I am
in the transport control mode uploading AFTER I have recorded the tape.
This is all frame accurate.
I want the Vegas 6 capture to aquire TC from the DSR-45 firewire
output during a LIVE recording on the DSR-45.
Larry
Navigation:
[Reply to this message]
|