|
|
Posted by Zeiggy on 08/23/06 20:52
Thanks, people!
I'll double check later tonight, but I do have a question. Graeme, as I
understand if I had my mic's XLR in Ch 1 and the PD150 audio meter
registered in Ch 1, then there should be audio in Ch 1, right? My deck
might be set to Ch 3 & 4, but what a brain-dead mistake that would be
(I'll check that first).
Are there channels (3 & 4) in my PD150 that I set explicity, or is this
from setting the sampling to 32K?
Thanks heaps!
I only monitored
Teeafit wrote:
> I've not thought this through totally myself, so I may be talking
> rubbish, but here's a thought:
>
> If you shot the audio on the PD150 at 32K sampling, then it should have
> gone to Channels 1 and 2 as normal. If you then play that on another
> player (you mention 'my deck') and that player is possibly switched to
> Channels 3 and 4, then you'll be playing back silent tracks. If the
> test tape you played (which DID work OK) had 48K audio (or 32K audio on
> Chs 3&4), then you would hear it.
>
> Could that the be answer?
>
> GRAEME ALDOUS
> Yorkshire
Navigation:
[Reply to this message]
|