|
|
Posted by Don M. on 09/21/06 16:03
<paulgutleber@comcast.net> wrote in message
news:1158810299.335936.77810@i3g2000cwc.googlegroups.com...
> I have no sound on playback after ripping a cassette tape, I have tried
> nero media player and CDex , I have the tape deck going to line in on
> the computer and a stereo hooked up to the line out and I get the sound
> through the speakers .After i record a song I will look at the file and
> it is about 1 meg of data per minute in the file. but when I go to
> play the song there is nothing ,
> .On window media player the playing time is corect ,compared to the
> actual time it took to record the song. I use the scope on WMP and it
> is a straight line. nero does the same thing
> I am lost to what it is. I have tried different settings on DCex but am
> not having any luck at all
> These tapes are inportant ,they are demo tapes that have never been
> released and are showing signs of deteration from 1990. any help would
> be welcomed
>
=========
Your "Line-in" is probably set to OFF in the Volume Control tool, on the Recording side
(Volume Control->Options->Properties->switch "Adjust volume for" from Playback to
Recording).
Use the "Record Wav" tool from Exact Audio Copy instead of CDex; at least you'll be able
to see if a signal is being recorded.
Don
Navigation:
[Reply to this message]
|