|
|
Posted by Me on 11/12/05 20:12
"Me" <Me@Me.com> wrote in message
news:t_rdf.7691$Tk1.141728@news20.bellglobal.com...
>
> "Rich Piehl" <rpiehl5REMOVETHIS@FORNOSPAMcharter.net> wrote in message
> news:UOodf.9576$GT3.9144@fe02.lga...
>> Before anyone jumps me for piracy I want it made clear that I'm only
>> interested in the freebie channels.
>>
>> I have a valid subscription to Dish Network, have a DN 500 dish and 2 DN
>> receivers on it. Is there a way, using DiSEcQ switches and splitters
>> that I can tap into the coax for the 2 feed horns and get the DN signal
>> to my VP 1020 card without disrupting the signal to the receivers?
>>
>> TIA
>>
>> Take, care,
>> Rich
>>
>> God bless the USA
>
>
> Sure is. How do you have it connected to your receivers now? Each coax
> (from the Dual LNB) to each of your receivers?
> If so, get a "Multi-Switch" . Plug both ends of dual LNB output to the
> input of the multi-switch, and the output of the multi-switch (can have 4
> or more outputs) connect to each of your receivers (and one to your VP1020
> card)
>
>
>
here is what they look like, note they don't work with Dish 500 if thats
what you have...
http://www.merchantamerica.com/utahsatellite/index.php?ba=product_enlarge&product=9558
Navigation:
[Reply to this message]
|