|
|
Posted by Gene Larson on 11/28/06 18:53
I'm selling a clean BVW-50 portable Betacam SP recorder. It was
recently re-capped, and appears to have new heads....the meter reads
only 23 hours! All of the functions have been tested...the video &
audio quality is excellent. It has lots of useful features, and can act
as an edit feeder for your NLE, a portable VCR for 26-pin cameras like
Sony D-30, or simply as a player/recorder in a multi-camera setup. It
accepts both large and small cassettes. It has 4 channels of audio with
pro XLR connectors, +48 volt phantom power, etc. The video has both BNC
and component YUV inputs. I'm including a new power supply with 4-pin
XLR cable attached, as well as a soft carrying case. Here are the
complete specs:
Features:
High Video/Audio Quality
Low Power Consumption
Front Loading System
Audio/Video Confidence Playback
Player VTR Capability via Sony 9-Pin Remote Control Interface
Built-In Time Code Generator/Reader
Component and Composite Input/Output
Character Generator
Phantom Power Supply
Large LCD Display
RCC-5G/10G/30G9-pin Remote Control Cable
RCC-B5G/B10G/B30GBVR-3 Connecting Cable
When used with metal particle tape videocassettes, the BVW-50 conforms
to the Betacam SP recording format with its wide luminance bandwidth,
improved signal-to-noise ratio, and other superior key parameters. When
used with oxide tape videocassettes, recordings conform to the
conventional Betacam format.
Although the BVW-50 provides a recording and playback time of over 90
minutes and has a built-in TBC capability, its power consumption has
been drastically reduced.
The BVW-50 incorporates a front access mechanism, and this has enabled
the BVW-50 to have a one-piece top panel made of high strength diecast
magnesium with no moving parts.
Confidence playback allows simultaneous playback of audio and video
during recording.
The BVW-50 is provided with a Sony 9-pin remote control interface
(RS-422) which allows connections to Betacam SP studio VTRs so that it
can be used as a player VTR.
The BVW-50 is provided with a built-in time code generator/reader.
Either component or composite input signals can be accepted from a
camera head via a 26-pin connector. Composite signals can be accepted
via a BNC connector.
The BVW-50 is provided with a built-in character generator which can
superimpose characters on Video Output 2.
The XLR input connectors associated with all four audio channel inputs
provide 48v Phantom powering for external microphones.
A large 8-bit LCD provides Tape Time, Time Code, and User Bit
indications.
Humidity: 25% to 80% (relative humidity)
Search speed: Max. +/- 5 times normal speed (with color picture)
Power requirements: DC 12V
Operating temperature: 0°C to 40°C (32°F to 104°F)
Storage temperature: -20°C to 60°C (-4°F to 140°F)
Power consumption: Save Rec. Mode: 19WPB/EE Rec. Mode: 29W
Continuous operating time: With one BP-90A: Approx. 180 min. (In Save
Rec. Mode)With one NP-1B's: Approx. 170 min. (In Save Rec. Mode)
Operating weight (including BP-1A battery and S-Cassette): Approx. 8.5
kg (18 lb 12 oz)
Tape speed: 11.86cm/sec.
Playback/recording time: More than 90 min. with BCT-90ML
Fast forward/rewind time: Less than 7 min. with BCT-90MLLess than 2
min. with BCT-30M
Fast forward/rewind speed: Max. +/- 16 times normal speed (with
monochrome picture)
I'll ship anywhere in the lower 48 states for $35 insured. Check my
feedback...over 1400 positives ! Payment must be received within 7 days
of auction close. GOOD LUCK!!! NO RESERVE!!!
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=160057425689
Navigation:
[Reply to this message]
|