|
Posted by Company Man on 12/14/06 07:30
"Jack Gillis" <XXXXXXXX@widomaker.com> wrote in message
news:12o0gcd3j1iggad@corp.supernews.com...
>
> <epokopac@excite.com> wrote in message
> news:1166023801.820799.294910@j72g2000cwa.googlegroups.com...
>> Perhaps the Sony only handles 480i at the component level and the
>> Samsung is outputting 480p. In theory, only the DVD part of the
>> Samsung
>> unit should be using the component electronics anyway. The VCR part
>> is
>> composite analog by design. Hope this helps.
>>
>> Regards,
>>
>> Eugene Pokopac (Lawrenceville GA)
>>
>
> Thanks again. The Sony will handle only 480i and the Samsung will
> output either i or p. It was set to output 480p. I made sure it
> was in the 480i mode and now get a picture. Viewing the cable, I
> see little or no difference on the screen. I expect that is because
> of what you said about only the DVD part using the component
> electronics.
>
> Thanks again for you help in enabling me to understand a little more
> than before.
>
Don't expect HD quality if you're stuck in 480i.
Navigation:
[Reply to this message]
|