|
|
Posted by idow8ss@yahoo.com on 12/06/05 02:02
I would hope to catch any dish at first just so I know the unit is
working as well as the LNB. I am hopeing to get SatCom C3. From what I
have been reading it is basically rookie mistakes I have been making and
it is normal to have <10% Quality strength when first mounting and
pointing the dish. Any pointers you have would be greatly appreciated.
Current location 43.1 Lat 79.6 Long
Mr Burns wrote:
> where are you and what sat. you looking for?
>
>
> <idow8ss@yahoo.com> wrote in message
> news:Lvrkf.687$eo.6@read1.cgocable.net...
>
>>Hi, Just bought a:
>>CoolSat 4000 pro with
>>18" dish
>>EagleStar 53-4552-2 DSS Dual LNBF.
>>I.F:11.20-12.70GHz
>>Noise figure: 0.5db
>>Gain: 55db
>>
>>The dish is mounted on my shed next to a local analog antenna (approx 3
>>feet away from each other. I keep getting Level @70% and Quality @5%
>>even after moving the dish a number of times.
>>
>>Should the hardware work together? I am running approx. 75-85 feet of
>>cable underground parallel to my analog coax cable so I am not sure if
>>this is where my problem lies also. I'd like to rule out the hardware I
>>purchased right away then so I can narrow down the issue. Any advice,
>>install guides, trouble shoot guides, would be greatly appreciated.
>>
>
>
>
Navigation:
[Reply to this message]
|