|
|
Posted by musicman on 12/26/06 22:53
kim wrote:
> "musicman" <stradlinizzy@yahoo.com> wrote in message
> news:1167153938.805359.72040@i12g2000cwa.googlegroups.com...
> > recently recorded a few old analog stereo music tapes to my DVD
> > recorder's internal storage drive, using the audio in stereo jacks from
> > the tape deck
> > the transfer dub sounds pretty good through the TV stereo speakers
> > question- what resolution is this recording at ?
> > it's an RCA DVD recorder, that can record onto a DVD blank in -R or +R
> > formats, or to the internal storage itself inside the unit
> > is this equivalent to a WAV file, MP3 file, or DVD-A file ?
> > I'm thinking it's the same as DVD-A, but not sure as there is nothing
> > about it in the owner's manual.
>
> DVD-A is 5.1 channel WAV so there is no way it could be that. Most likely
> it's 2.0 channel AC-3.
>
> (kim)
not all DVD-A is 5.1 channel- I have factory releases of early Triumph
concert in California that was remastered to DVD, and it has both
stereo 2.0 and 5.1 options
there's a lot of variations of DVD-A, although the most famous and
respected is the 5.1 surround sound version
see it here:
http://en.wikipedia.org/wiki/DVD-A#Audio_specifications.07UNIQ2f8117ea48f0850c-nowiki-0000000D-QINU2.07UNIQ2f8117ea48f0850c-nowiki-0000000E-QINU
stereo 2.0 can be anywhere from 44khz to 192 khz, and 16-20-24 bit
rate
I'm just wondering what the resolution is for these recordings I made-
I know they are stereo
what's AC-3 ??
Navigation:
[Reply to this message]
|