Posted by tg on 01/07/07 15:13

On Sat, 6 Jan 2007 23:24:51 -0000, "Frank Incense" <dmrt46@nospam.com>
wrote:

>I have a Denon 1920 and a Sky HD box BUT only 1 HDMI port on the TV
>
>My question is - on the front panel of dvd player is button marked "HDMI"
>and each press gives the following off, 480 570 720 1080 etc which is fine
>when connected via HDMI to the TV
>
>BUT if I use COMPONENT connection instead will the DVD player upscale the
>image? The reason I ask is that when using COMPONENT and have DVD palyer
>set to output "component interlace" the TV only says its receiving either
>480 or 570.
>
>Is the only true way to upscale via HDMI then??
>
>It seems difficult to tell sometimes if the pic is much diff either way
>sometimes
>
>Thanks normally ok with all this but this time its a tad confusing - must be
>gettin old ;-)



I've got the newer Denon 1930 DVD player.

It will only output a maximum res of 575 progressive on component.
This is only possible if the HDMI button on the DVD is set to off.
If HDMI is set to on the component output will be 575 INTERLACED.

• Next in forum: Re: HDMI and upscaling player question
• Prev in forum: Re: recording analog stereo to DVD recorder hard drive
• Thread view: Re: HDMI and upscaling player question

[Reply to this message]