|
|
Posted by Mike Kujbida on 07/30/07 19:06
On Jul 30, 2:40 pm, dh@. wrote:
> We have JVC GY-DV500 cameras. I couldn't find a
> model number on the lens itself, but the zoom unit
> mounted on the side of the lens says:
>
> Fujinon S20 x 6.4 BRM-SD
> 1:1.4 / 6.4-128mm
> I don't know what all that means yet.
It means that it's a 20:1 zoom lens.
It also means that whoever you bought the cameras from had the
foresight to buy good lenses as the stock lens sucked.
> The lens has
> holes that look like they have threaded inserts in them,
> for securing the manual focus unit etc to the lense with
> a bolt. If they really are inserts in the holes, is it possible
> to replace them? We have some that are broken off at
> the outer end, so the bolt will no longer reach it.
If it's anything like the holes on the lens on my Canon (on a JVC
550), they're not inserts but actual drilled holes.
> Also, is it possible to get an iris control to mount on
> the tripod handles? We have one for zoom and
> focus, and it would be great to have one for iris too.
The only lens I could find on the Fuji site that's close to your
number is an S20X6.4BMD at http://fujinon.com/Broadcast/Product.aspx?cat=73&id=222
If you go to the Accessories page, it shows 3 different lens
controllers.
You'd have to check with a local broadcast equipment rep or a Fuji rep
to confirm whether they're able to be mounted on a tripod handle
though.
My guess is no :-(
Mike
Navigation:
[Reply to this message]
|