|
Posted by Pat Horridge on 10/26/07 14:26
<dmdsafe@gmail.com> wrote in message
news:1193387587.335052.32220@t8g2000prg.googlegroups.com...
> On Oct 24, 2:20 am, "Pat Horridge" <p...@remove-spam.vet.co.uk> wrote:
>> "Richard Crowley" <rcrow...@xp7rt.net> wrote in message
>>
>> news:5o6hq0Fkc8fhU1@mid.individual.net...> <dmds...@gmail.com> wrote ...
>> >>I have a Sony VX-1000 with focus issues. It will be turned to auto
>> >> focus and when I set it on a table at the edge it will not focus on
>> >> the other side of the room. I can manually focus it on something super
>> >> close but after i switch it to auto everything is out of wack again.
>>
>> > So is it related to "on a table at the edge"?
>> > Does it do the same thing in the same position
>> > but mounted on a tripod? Are you sure you not
>> > occluding some infrared sensor, etc?
>>
>> Sounds like optical misalignment.
>> I presume you can't manually achieve the normal full range of focus. ie
>> from
>> infinity to close up.
>> If you can manually do that then the lens is ok it's justt he auto focus
>> gone to pot.
>> If however you can't actually manually achieve the correct focus the auto
>> focus won't have a hope.
>>
>> Camera been dropped or bashed recently?
>
> the owner uses it for skateboarding so i expect its been bashed quite
> a few times.
> I can manually focus it to what i believe is half of the range. That
> is when at full wide zoom i can get it unfocused then almost focused.
>
> ex.
> blurry-------------focused---------------blurry
> x---------------------x-|-----------------------------
>
> I can manually adjust it between the x's
>
>
> I was thinking along those lines(misalignment) whereas something
> inside can't be electronically controlled due to blockage inside.
>
> Have you had good luck fixing this problem pat?
>
>
Not on that particular camera but it's not uncommon for the internal lens
elements to be jarred and drop out of position.
It may simply be a massive back focus problem or an actual lens broken
issue.
Eitehr way it's not going to be cheap. Backfocus can be adjusted if you dig
in deep but a mechanical lens problem will almost certainly require a
replacement.
I'd go for the Sony fixed price repair. I suspect in your case you'd be
getting a bargin.
Navigation:
[Reply to this message]
|