|
|
Posted by Ty Ford on 02/23/06 15:38
On Wed, 22 Feb 2006 18:06:57 -0500, AJA wrote
(in article <1140649617.868419.62280@f14g2000cwb.googlegroups.com>):
> OK, I give. I have been pulling my hair out to make this work. I hope
> someone has some tips.
>
> I am shooting footage with a Sony Z1U with a Sennheiser 418S. I cannot
> figure out how to get the audio into my G5 and set it up. The 418 is a
> stereo mic that works only when you bring the L and R channels through
> a mixer; duplicate the L into two faders; Rev phase on one and pan them
> full R and L, the original R input is then set center. This gives full
> post-production control of the stereo audio image using these three
> faders.
>
> This was no problem when I was editing on the AVID and sending the
> audio through a Yamaha mixer. But, now I'm on a Mac with FCP HD and the
> image and video goes in via Fire Wire. I have a Sony HDV deck, but that
> chages nothing.
>
> Within FC, how do you duplicate an audio channel and reverse phase on
> it? This is the only way to make the audio sound correct after shooting
> everything for the past 6 months with the 418S. If you've got some
> hints, thanks. I am new (about 2 months) using FCP
>
Dunno. I haven't found the audio side of FCP to be very flexible. Don't know
if Soundtrack Pro even offer what you need. Maybe export it to a program
that will let you handle the M/S then bring it back in.
Ty Ford
-- Ty Ford's equipment reviews, audio samples, rates and other audiocentric
stuff are at www.tyford.com
Navigation:
[Reply to this message]
|