Posted by yarock on 03/02/06 11:55
I guess I'll try and do a test shoot. Btw, here's something I got from
a very helpfull and successfull camera guy on one of the other forums-
<The XL2 will cut pretty well with the FX1. Mainly
make sure your white balance is even on both. I would leave the FX1 on
the
stock settings. The XL2 depending on conditions will probably need the
knee
set to low, if the FX1 is pulling a lot of detail from the shadows, set
the
blacks to stretch on the XL2. The XL2 cheats a little toward green
because
DV LOVES green so you might need to turn down the blue a notch or 2 in
the
XL2. I would use normal video gamma on both as well.
Thanks
yarock
Navigation:
[Reply to this message]
|