|
|
Posted by Herman Phnorge on 10/06/85 11:42
Rumour has it that on or about 10 Mar 2006, Charles Marslett <c-deletethis-
marslett@yahoo.com> wrote:
>
> I had trouble with my LG-4167 trying to burn dual layer disks the
> first time -- I never was able to get a successful burn on the cheap
> GQ dual layer media from Fry's. I had a similar problem (dual layer
> only -- mine does single layer buring perfectly) and I got it to go
> further with the Fry's DL disks by forcing the burn to 2.0x rather
> than 2.4x. I believe the drive does not do 2.4x and trying to always
> fails. After that, the disk burn would complete but the verify would
> fail at the layer change (or pretty close -- it did not fail at the
> same point every burn, just some point shortly after the midpoint of
> the disk).
>
> I do have to say that I really have had no trouble at all with single
> layer burns (mostly on Taiyo Yuden printable 4x and 8x DVD-R media).
>
> I use either ImgBurn 1.1 (a really great, free ISO burning program) or
> Nero 6.6.
>
> I change to Verbatim DL disks and the one burn attempt since then
> completed and verified without any pauses or other signs of problems.
>
> --Charles
>
Thanks Charles,
I thought that it might have been the media, as I was using all generic. I
did try the ridata disks, which seemed to be higher quality, and it did
exactly the same. (of course, I have no idea what quality ridata disks
are, but at least they have a name on them).
I think my next step should be to put the drive in another machine, and
make sure the problem isn't because of some bad module in the driver chain.
I sure hate making DL coasters!
Navigation:
[Reply to this message]
|