|
|
Posted by George Gleason on 10/05/49 11:44
"Paul Stamler" <pstamlerhell@pobox.com> wrote in message
news:l83_f.763$YT1.498@bgtnsc04-news.ops.worldnet.att.net...
> <blackburst@aol.com> wrote in message
> news:1144547544.684645.263470@t31g2000cwb.googlegroups.com...
>> > What about running balanced +4dBu audio to some powered speakers, like
> the
>> > smaller E-V's?
>>
>> I'm considering this. Can it make a 600 foot run with no problems?
>
> Probably, but you'll need to do the calculation. Figure the capacitance of
> the cable and the output Z of the driving source, and see if the rolloff
> is
> within reasonable limits. With a 75-ohm output Z and reasonably
> low-capacitance cable you should be okay; with a 150-ohm output Z you'll
> have to keep a close eye on your cable capacitance.
>
> Peace,
> Paul
>
>
I deploy a500 foot mic cables to feed delay zones at live events
no problems with singnal
george
Navigation:
[Reply to this message]
|