|
Posted by John Wilson on 10/11/05 01:24
FYI...I bought 2 DSR101s when they came on the market. I have the
capability to simultaneously test two FTA receivers from the same
antenna/lnb configuration. Long story short...
the DSR101 is what is called "deaf". It's video/audio demodulator is
not sensitive. This means you must have a stronger signal input to
receive noise reception than if you used a Pansat or comparable FTA
receiver that has a sensitive video/audio demodulator. Additionally if
you are not careful and exceed a certain number of channels entries, the
DSR101 will delete previously stored entries.
My suggestion to you is to do what I did. I got rid of both receivers
ASAP after noticing the a certain FTA video and audio signal was fine on
a Pansat 330 and on the DSR101 the video was pixeling and the audio
chopping. I sold them at a loss and have never regreted it. Cut your
loss and in my opinion get rid of that piece of crap.
Joe wrote:
> Hi there,
>
> I have a Satcruiser DSR101 Plus receiver.
> It's a few days that it doesn't work. It
> shows the message: "No (or Bad ) Signal !
> Check your antenna cable". The dish and
> cables are ok. It's locked on one channel and
> pressing keys on the remote controller or on
> the receiver doesn't change any thing. The
> LED display on the receiver is off. Sometimes
> when I press some keys, it shows "Testing
> Tuner" message.
>
> It seems that there is software problem with
> the receiver.
>
> Does any body has any idea how can I find and
> fix the problem?
>
> Thanks.
>
> Joe
Navigation:
[Reply to this message]
|