|
|
Posted by Funfly3 on 11/27/05 18:07
"Bob" <spam@uce.gov> wrote in message
news:4389efad.309719500@news-server.houston.rr.com...
> On Sun, 27 Nov 2005 17:09:40 GMT, "Funfly3" <dontemailme@ntlworld.com>
> wrote:
>
>>Hi I have a Bush DVD DVR3003 recorder and I brought some DVD+R RW disks, 2
>>questions should I be able to read the disks on a PC and how do you erase
>>them as they cannot be seen by my PC and the recorder refuse to erase them
>
> Assuming the unit is designed to use DVD+RW disks, it sounds like the
> unit is defective. You might try a full erase with a DVD burner on
> your computer and then do a reformat with the DVR3003. Try several
> times by cycling the tray. Make certain the tray and disc are clean.
>
> I have an ILO DVDR05MU and it works just fine with Verbatim DVD+RW
> discs after I did a full erase and reformat on each disc. There is a
> newer model out, the MU1, so I got one to evaluate but right out of
> the box it has trouble with the same +RWs. I did a full erase and
> reformat and it still acts up. I will consult with ILO Tech Support
> because it may be a firmware issue. If not, back it goes to WM.
>
>
> --
>
> "One must realize that the world is a network of real and virtual
> combat zones where the stakes are high, struggle is the primary
> mode of being and only total victory is acceptable.
> -- Sun Tzu, "The Art Of War"
I cannot see what ever is on the disks in my computer they just come up
insert disk used but they will play in the recorder but you cannot erase
them either in the recorder or my PC
Navigation:
[Reply to this message]
|