|
|
Posted by kohlrabi_croce on 06/22/07 23:29
On Fri, 22 Jun 2007 16:12:44 -0700, "Richard Crowley"
<rcrowley@xp7rt.net> wrote:
><kohlrabi_croce@yahoo.com> wrote ...
>> I'm not sure if that's what the problem is - I put in an old
>> tape in it that I recorded before this problem started,
>
>So are you saying that tapes recently recorded playback OK?
>Do recently recorded tapes play back elsewhere OK?
>
>> and it plays, but there are black lines on the image,
>> as seen in the viewfinder.
>
>Does that mean only in the viewfinder, the video out of
>the BVV5 is OK?
>
>Likely need something more substantial than "black lines".
>A frame-capture image posted online somewhere is worth
>1000 words.
That would be a little difficult. My workstation is dead.
>
>> I know the footage is good, it's the deck. I already tried
>> cleaning the heads with a cleaning tape.
>>
>> So next week I have to look around for somebody to
>> take a look at it. Does it sound like it might just need
>> a little alignment?
>
>That would be my first guess. Of course, if you have been
>recording tapes out of alignment, then THEY won't play
>back properly after the BVV5 is aligned. Recommend
>going through all the tapes to determine which were
>recorded out-of-interchange. You might want to dub them
>before getting the machine fixed.
Ok ,good to know that's a good guess.
The tape I played was recorded "in alignment"
some time ago. It played back "in aligngment" at that
time. Now it's playing out of alignment.
Thanks very much.
Navigation:
[Reply to this message]
|